Published: 31 March 2018

Erratum: Structural health monitoring of 3D frame structures using finite element modal analysis and genetic algorithm

S. Tiachacht1
A. Bouazzouni2
S. Khatir3
A. Behtani4
Y.-L.-M. Zhou5
M. Abdel Wahab6
1, 2, 4Laboratory of Mechanics, Structure and Energetics (LMSE), Mouloud Mammeri University of Tizi-Ouzou, B.P.N°17 RP, 15000, Algeria
3Department of Electrical Energy, Systems and Automation, Faculty of Engineering and Architecture, Ghent University, Ghent, Belgium
5Department of Civil and Environmental Engineering, National University of Singapore, 2 Engineering Drive 2, 117576, Singapore
6Division of Computational Mechanics, Ton Duc Thang University, Ho Chi Minh City, Vietnam
6Faculty of Civil Engineering, Ton Duc Thang University, Ho Chi Minh City, Vietnam
6Soete Laboratory, Faculty of Engineering and Architecture, Ghent University, Technologiepark Zwijnaarde 903, B-9052, Zwijnaarde, Belgium
Corresponding Author:
M. Abdel Wahab
Views 34
Reads 12
Downloads 1272

The description of the correction

The author’s name was misspelled in the paper originally submitted and finally approved (after the acceptance) by the Authors.

Incorrect author’s name:

Y.-L.-M. Zhou

Correct author’s name:

Y.-L. Zhou

About this article

Received
Accepted
25 February 2018
Published
31 March 2018
Source