Erratum: Cogging force reduction for tubular permanent magnet linear motor by slots with different sizes

Pengfei Hou1 , Kefeng Huang2 , Puyu Wang3 , Jinquan Wang4 , Ye Xu5

1, 2, 4, 5PLA University of Science and Technology, Nanjing, 210007, China

3Nanjing University of Science and Technology, Nanjing, 210094, China

2Corresponding author

Journal of Vibroengineering, Vol. 20, Issue 6, 2018, p. 2539-2539. https://doi.org/10.21595/jve.2018.20272
Accepted 30 September 2018; published 30 September 2018

Copyright © 2018 JVE International Ltd. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons License
Back to Original Publication.
Journal of Vibroengineering
Table of Contents Download PDF Acknowledgements
Cite this article
Views 44
Reads 18
Downloads 1136
WoS Core Citations 0
CrossRef Citations 0

Our Conferences

63rd Conference in Shanghai, China
May 18, 2023 in Shanghai, China
64th Conference in Trieste, Italy
September 21-22, 2023 in Trieste, Italy
65th Conference in Resita, Romania
October 20-21, 2023 in Resita, Romania
66th Conference in Istanbul, Turkey
November 25, 2023 in Istanbul, Turkey
www.jveconferences.com

The description of the correction

The acknowledgements section was missing in the paper originally submitted and finally approved (after the acceptance) by the authors.

Acknowledgements

This work was supported by the Fundamental Research Funds for the Central Universities under Grant No. 30917011330.

JVE Journals is rebranding to Extrica

Inspired by innovations from the previous century and the rapid growth during the last years, we are improving for excellence in your publishing experience

Read to know more
JVE Journals
Extrica