Published: 31 March 2012

Diagnostic method of measuring hanger rods tension forces in the suspension of the power boilers combustion chamber

Jerzy Czmochowski1
Artur Górski2
Michal Paduchowicz3
Eugeniusz Rusinski4
Views 6
Reads 5
Downloads 1314


Combustion chambers of contemporary power boilers are suspended on hanger roads because of thermal strains. The hangers are placed along the side edges of a rectangular chamber. A tensile force of hanger road has a significant influence on stress state of combustion chambers. A method of tensile force measurements and determine the correct of are tensile force is therefore important. There are presented a novel method of a tensile force's measurements and methodology for determining the distribution of tensile forces.

About this article

11 September 2011
14 February 2012
31 March 2012
combustion chambers
natural frequencies measurements