Published: 15 November 2018

Erratum: Local vibration characteristics of rotating blades induced by moving rub impact loads

Chaofeng Li1
Houxin She2
Shuhua Yang3
Hexing Yu4
Bangchun Wen5
1, 2, 4, 5School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, China
3Shenyang Blower Works Group M&C Tech. Co. Ltd., Shenyang, 110869, China
Corresponding Author:
Chaofeng Li
Views 37
Reads 12
Downloads 1304

The description of the correction

Fig. 1(a) from the Ref. [1] was used, but the reference was not cited in figure title and the copyright was missing in the original article and finally approved (after the acceptance) by the authors.

The revised figure title is as follows:

Fig. 1Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [1] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [1] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

a)

Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [1] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

b)

About this article

Received
Accepted
11 November 2018
Published
15 November 2018
Source