Published: 15 November 2018

Erratum: Research on the FE and semi-analytical solution with the blade-casing rub-impact dynamical system

Chaofeng Li1
Houxin She2
Qiansheng Tang3
Bangchun Wen4
1, 2, 3, 4School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, China
Corresponding Author:
Chaofeng Li
Views 44
Reads 10
Downloads 1291

The description of the correction

Fig. 1(a) from the Ref. [13] was used, but the reference was not cited in figure title and the copyright was missing in the original article and finally approved (after the acceptance) by the authors.

The revised figure title is as follows:

Fig. 1Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [13] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [13] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

a)

Schematic of rotating blades force environment: a) Cut-view of an aircraft engine with sensitive contact areas [13] (https://doi.org/10.1115/1.4006446; Copyright © 2012 by American Society of Mechanical Engineers); b) Schematic of blade-casing

b)

About this article

Received
Accepted
11 November 2018
Published
15 November 2018
Source