Abstract
The model for the analysis of stresses in the coating of a straight beam performing transverse vibrations is presented. The developed numerical procedure is based on the technique of conjugate approximation with smoothing adapted for this specific problem. Relative error norms are calculated and their relationship with the required smoothing is determined
About this article
Received
07 January 2009
Accepted
10 March 2009
Published
31 March 2009
Keywords
beam vibrations
eigenmode
conjugate approximation
conjugate smoothing
finite elements
Copyright © 2009 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
