Abstract
The paper proposes a novel laser beam light intensity control system, which functionality is based on piezoelectric actuators and special membrane that is comprised from two gratings. Geometrical adjustment between adjacent pores in both plates results in zero light intensity through the membrane when no control signal is activated. Displacement of one of the control membrane plates with micro pores generates effects which are exploited for laser beam flow power control.
About this article
Received
April 11, 2011
Accepted
May 15, 2011
Published
June 30, 2011
Keywords
light intensity control
piezoelectric actuator
laser
Copyright © 2011 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
