Journal of Vibroengineering

Volume 10, Issue 3

September 30, 2008, Pages (261-417)

Research article

2008-09-30

Theoretical and applied bases of new generation active safety systems of mobile machines

R. Fourounjiev, Y. Slabko

p. 261-268

Research article

2008-09-30

Constant magnet motors

Influence of overload on low-frequency instability of working process in the combustion chamber of the solid propellant rocket engine

Yu. M. Davydov, I. M. Davydova, M. Yu. Egorov

p. 272-276

Research article

2008-09-30

On parametric oscillations of pendular and rotor systems

A. M. Gouskov, G. Ya. Panovko

p. 277-281

Research article

2008-09-30

Analysis of a model of the adhesive layer between two sheets of paper

G. Petriaszwili, J. Pyrjew

p. 282-284

Research article

2008-09-30

Online-estimation of vibratory driven piles’ bearing capacity: a first approach

M. Schönit, D. Reusch

p. 285-292

Research article

2008-09-30

Information entropy determination in scales measurement including mechatronic approach

M. Rybokas, R. Bansevicius, V. Giniotis

p. 293-296

Research article

2008-09-30

Innovative mechanical systems with rotary piezomotor

The new analytical method of acoustic field estimation in the room

New intelligent regulators for mechatronic systems

R. Fourounjiev, A. Homich

p. 307-315

Research article

2008-09-30

Evaluation of the strength anisotropy for railway wheels

Z. Bazaras, J. Sapragonas, V. Vasauskas

p. 316-324

Research article

2008-09-30

Research of dynamics of rotary vibration actuators based on magnetic coupling

K. Ragulskis, R. Jonušas, K. Kanapeckas, K. Juzenas

p. 325-328

Research article

2008-09-30

Research of relation between muscle biosignal and systolic blood pressure, and application of its characteristics for evaluation of efficiency

M. Mariunas, K. Daunoraviciene, J. Griškevicius, J. Andrašiute

p. 329-334

Research article

2008-09-30

Research of the influence of load, systolic blood pressure and pathology on local pressure in elastic arteries

Evaluation method of muscle non-linear system’s electromechanical efficiency

M. Mariunas, K. Daunoraviciene

p. 341-346

Research article

2008-09-30

Line scale Comparator Carriage vibrations during dynamic calibration

A. Kasparaitis, V. Vekteris, A. Kilikevicius

p. 347-354

Research article

2008-09-30

Investigation of compression of elements of packaging materials

E. Kibirkštis, A. Dabkevicius, A. Kabelkaite, L. Ragulskis

p. 355-362

Research article

2008-09-30

Coupling of energy flows from internal combustion engine and electrical motor in hybrid vehicle

M. Starevicius, K. Pilkauskas, J. Sapragonas

p. 363-369

Research article

2008-09-30

Linear electric drives for constructional purposes

R. Rinkeviciene, A-J. Poska, A. Slepikas

p. 370-377

Research article

2008-09-30

Slow steady-state flow of viscous fluid near vibrating cylinder; analytical solution for asymmetric channel

V. Kargaudas, R. Bansevicius, A. Bubulis, M. Valaika

p. 378-382

Research article

2008-09-30

The influence of vibroacoustics on Self-organizing of Sige nanostructures onto silicon substrate

A. Bogoroš, S. Voronov, S. Larkin

p. 383-387

Research article

2008-09-30

Study of natural frequency shifting in a MEMS actuator due to viscous air damping modeled by nonlinear reynolds equation

V. Ostasevicius, R. Dauksevicius, R. Gaidys

p. 388-396

Research article

2008-09-30

Behaviour of dynamic processes in self-exciting vibration of a pipe robot

K. Ragulskis, M. Bogdevicius, V. Mištinas

p. 397-399

Research article

2008-09-30

A linear optimization approach to inverse kinematics of redundant robots with respect to manipulability

W. Lalo, T. Brandt, D. Schramm, M. Hiller

p. 400-404

Research article

2008-09-30

Dem analysis of effect of the particle size during the material flow in wedge-shaped hopper

R. Balevicius, R. Kacianauskas

p. 405-410

Research article

2008-09-30

Damping of small electronic equipment vibrations

D. Gužas

p. 411-417