Journal of Mechatronics and Artificial Intelligence in Engineering
publishes theoretical and/or experimental work in the area of mechatronics, mechanical and electrical engineering based on artificial intelligence
The List of Principal Topics:
- ▸ Automotive
- ▸ MEMS/NEMS
- ▸ Electronics
- ▸ Image processing
- ▸ Intelligent artificial
- ▸ Information theory
- ▸ Electrical systems
- ▸ Power electronics
- ▸ Control theory
- ▸ Embedded systems
- ▸ Robotics
- ▸ Motion control
- ▸ Stochastic modeling
- ▸ System design
- ▸ Multidisciplinary engineering
- ▸ Design and manufacture of industrial products and processes
- ▸ Computer engineering
- ▸ Optical engineering
- ▸ Design optimization
- ▸ Material science
- ▸ Metamaterials
- ▸ 2D materials heat and mass transfer, kinematics
- ▸ Dynamics
- ▸ Thermo-dynamics
- ▸ Energy and applications, renewable energy
- ▸ Environmental impacts
- ▸ Structural analysis
- ▸ Fluid dynamics
Journal of Mechatronics and Artificial Intelligence in Engineering (JMAI) ISSN (Online) 2669-1116 publishes original theoretical and/or experimental work and tutorial expositions of permanent reference value in the general area of mechatronics, including different applications in mechanical and electrical engineering based on artificial intelligence. The aim of the Journal is to present the state of the art, recent advances and practical applications of Mechatronics. Its scope encompasses all practical aspects of the theory and methods of mechatronics.
Established in 2020 and published 2 times a year (semiannually).
Journal is indexed in
- EBSCO: https://www.ebsco.com
- Google Scholar: https://scholar.google.com
- JGate: https://jgateplus.com
- Scientific Indexing Services: https://www.sindexs.org
- ASOS Indeks: https://asosindex.com.tr
- CORE: https://core.ac.uk
- Ulrich's Periodicals Directory: https://ulrichsweb.serialssolutions.com
- CNKI Scholar: http://eng.scholar.cnki.net
- cnpLINKer (CNPIEC): http://cnplinker.cnpeak.com
- CiteFactor: https://www.citefactor.org
- ResearchBib: https://journalseeker.researchbib.com
- Directory of Research Journals Indexing: http://olddrji.lbp.world
- EuroPub: https://europub.co.uk
- Advanced Sciences Index (ASI): https://www.journal-index.org
- WorldCat Discovery Services: https://www.oclc.org/en/worldcat-discovery.html
- MyScienceWork: https://www.mysciencework.com
- Crossref: https://search.crossref.org
Dr. Cemil Közkurt
Bandirma University, Turkey
Editor in Chief and Assistant
Author guidelines and publishing charges
Your manuscript should be submitted online via JVE Journal Management System (JMS) https://manage.extrica.com.
Using the JMS requires an account. You can create a new account by following the 'Create an account' link that appears on the main login page. The signup process only takes a minute – we don't need many details from you. Once you've created your account or signed in, you're ready to submit a manuscript: Submit manuscript.
Your manuscript should be uploaded in Microsoft Word and Adobe PDF formats. Note that if your manuscript is accepted for publication, the manuscript will be reprocessed by JVE team. But to start with, manuscript format should conform the Paper Template.
Article processing charges
There are no article processing charge (APC) and no publication charge for Authors.
Publication ethics and malpractice
The ethics statements for our journals are based on Code of Conduct and Best-Practice Guidelines for Journal Editors.
Intelectual property rights
Journal of Mechatronics and Artificial Intelligence in Engineering is published Open Access. By 'open access' we mean its free availability on the public internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use for commercial purposes, or any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself. Authors retain the copyright and full publishing rights without restrictions. Article(s) are published under the Creative Commons Attribution License (CC-BY).
Mingyao Wen, Vanliem Nguyen
To evaluate the effect of the engine vibration on the vehicle's ride comfort and improve the vehicle's ride comfort, three types of engine’s isolation systems including the traditional rubber mount (TRM), hydraulic mount (HM), and semi-active HM controlled by the PID control (SHM) are proposed. A dynamic model of the inline 4-cylinder engine is established to determine the excitation force of the engine. By the combination of the random excitation of the vehicle floor affecting the engine isolat
Journal of Mechatronics and Artificial Intelligence in Engineering, Vol. 3, Issue 1, 2022, p. 1-11.
Xinyu Ji, Jianyu Chu, Yinfeng Li, Chang Ruan
The existing aircraft center track extraction methods only extract the position information of the trajectory, which cannot meet the requirements of abnormal trajectory detection and trajectory prediction. This paper innovatively proposes a center locus extraction algorithm based on multidimensional hierarchical clustering. Firstly, to solve the problem that trajectory resampling is easy to lose the original trajectory features, an equal arc length interpolation resampling method is proposed to
Journal of Mechatronics and Artificial Intelligence in Engineering, Vol. 2, Issue 2, 2021, p. 63-72.
Hadi Kolivand, Azita Souri
Twisted and coiled polymer muscles (TCPM) are inexpensive, light weight and simple artificial muscles that are introduced recently. For implementation of this muscle as a linear controllable actuator, we need an open loop or closed loop control system. In this paper we proposed a new artificial stepper tensile actuator based on joule-heated TCPM (we name it “stepper TCPM”) that will be used as a stepping straight actuator and can be control via an open loop control system. There are not any sens
Journal of Mechatronics and Artificial Intelligence in Engineering, Vol. 2, Issue 1, 2021, p. 44-53.
Ozcan Cetinkaya, Hilmi Kuscu, Kenan Kilicaslan
The study discusses the control of a five-axis robotic arm, the orbit planning involved, and experimental applications that make use of the arm. A robotic arm unit located at the Trakya University has been used for the study; LabVIEW 2010 (student edition) and MATLAB 2010a (student edition) applications have been used for the orbit planning programs and the arm has been successfully operated. Using the program developed, the coordinates of the starting and ending positions for the robotic arm ha
Journal of Mechatronics and Artificial Intelligence in Engineering, Vol. 1, Issue 2, 2020, p. 83-92.
Powered by the sun: designing and analyzing technical and economic aspects of a school sustained by photovoltaics
Sabri Çiftçi, Mehmet Solak, Melih Kuncan
Turkey has a young population. Accordingly, 66849 schools are serving under the Ministry of National Education. This amount of school naturally causes large amounts of electrical energy demand. Supporting even a small part of these schools with renewable energy sources will provide enormous economic and environmental contributions. Moreover, school buildings often share a template architecture, so a design can be reused, with some modifications over and over again. In this study, the PVsyst soft
Journal of Mechatronics and Artificial Intelligence in Engineering, Vol. 1, Issue 1, 2020, p. 21-32.