Vibroengineering PROCEDIA, Vol. 18

Mechanical vibrations and applications

The simultaneous action of external excitations – features of the dynamical damping of vibrations Sergey Eliseev, Alexey Orlenko, Andrey Eliseev	p. 1-7 PDF
The simultaneous action of external excitations – features of the dynamical damping of vibrations Sergey Eliseev, Alexey Orlenko, Andrey Eliseev	p. 1-7 PDF
Experimental analysis of the oscillations of two-mass system with self-synchronizing unbalance vibration exciters Grigory Panovko, Alexander Shokhin	p. 8-13 PDF
Experimental analysis of the oscillations of two-mass system with self-synchronizing unbalance vibration exciters Grigory Panovko, Alexander Shokhin	p. 8-13 PDF
Calculation and construction of the tolling roller table Gulbarshyn Smailova, Saltanat Yussupova, Assemgul Uderbaeva, Lazzat Kurmangaliyeva, Gani Balbayev, Algazy Zhauyt	p. 14-19 PDF
Calculation and construction of the tolling roller table Gulbarshyn Smailova, Saltanat Yussupova, Assemgul Uderbaeva, Lazzat Kurmangaliyeva, Gani Balbayev, Algazy Zhauyt	p. 14-19 PDF

Fault diagnosis based on vibration signal analysis

Shaft crack detection during shut-down using continuous wavelet transform Prabhakar Sathujoda, Alistair Dastgir	p. 20-26 PDF
Shaft crack detection during shut-down using continuous wavelet transform Prabhakar Sathujoda, Alistair Dastgir	p. 20-26 PDF
Impact testing of end-winding in two hydro generators in different temperature state Maja Anachkova, Jovana Jovanova, Zlatko Petreski	p. 27-30 PDF
Impact testing of end-winding in two hydro generators in different temperature state Maja Anachkova, Jovana Jovanova, Zlatko Petreski	p. 27-30 PDF
Teager energy enhancement base on polar coordinates at angular domain and feature extraction of bearing’s early fault Jianmin Mei, Chun Chang, Gang Ren	p. 31-35 PDF
Teager energy enhancement base on polar coordinates at angular domain and feature extraction of bearing’s early fault Jianmin Mei, Chun Chang, Gang Ren	p. 31-35 PDF
Dynamic analysis of reciprocating compressor with a translational joint clearance Shouguo Cheng	p. 36-40 PDF
Dynamic analysis of reciprocating compressor with a translational joint clearance Shouguo Cheng	p. 36-40 PDF
An early fault feature extraction method for rolling bearings based on variational mode decomposition and random decrement technique Chengcheng Zhu, Kaiming Teng	p. 41-45 PDF
An early fault feature extraction method for rolling bearings based on variational mode decomposition and random decrement technique Chengcheng Zhu, Kaiming Teng	p. 41-45 PDF
Engine fault diagnosis based on multi-resolution analysis and dual microphones Rong Zeng, Ruili Zeng, Jianmin Mei, Lei Ding	p. 46-51 PDF
Engine fault diagnosis based on multi-resolution analysis and dual microphones Rong Zeng, Ruili Zeng, Jianmin Mei, Lei Ding	p. 46-51 PDF
Multiple information fusion based on single component feature and diagnosis of gear’s early fault Jianmin Mei, Gang Ren, Chun Chang	p. 52-56 PDF
Multiple information fusion based on single component feature and diagnosis of gear’s early fault Jianmin Mei, Gang Ren, Chun Chang	p. 52-56 PDF

Vibration generation and control

Ultrasonic stent motor S. Toyama, U. Nishizawa	p. 57-61 PDF
Ultrasonic stent motor S. Toyama, U. Nishizawa	p. 57-61 PDF
Self-tuning vibration absorber and the effect of its installation position on damping characteristics Huamin Wang, Yijun Dong, Rong Cai, Yali Liu	p. 62-67 PDF
Self-tuning vibration absorber and the effect of its installation position on damping characteristics Huamin Wang, Yijun Dong, Rong Cai, Yali Liu	p. 62-67 PDF
Comparison of torsional vibration dampers in terms of the dissipated power amount Vaclav Píštěk, Mykola Gorbunov, Pavel Kučera, Olena Nozhenko	p. 68-72 PDF
Comparison of torsional vibration dampers in terms of the dissipated power amount Vaclav Píštěk, Mykola Gorbunov, Pavel Kučera, Olena Nozhenko	p. 68-72 PDF
Active control of the nonlinear bending behavior of magnetorheological elastomer sandwich beam with magnetic field Nassim Zeerouni, Salah Aguib, Abdelkader Nour, Toufik Djedid, Ali Nedjar	p. 73-78 PDF
Active control of the nonlinear bending behavior of magnetorheological elastomer sandwich beam with magnetic field Nassim Zeerouni, Salah Aguib, Abdelkader Nour, Toufik Djedid, Ali Nedjar	p. 73-78 PDF

Seismic engineering and applications

Seismic response analysis of underground cavern groups of Xiluodu hydraulic power plant Wei Shao, Yongqing Zeng	p. 79-84 PDF
Seismic response analysis of underground cavern groups of Xiluodu hydraulic power plant Wei Shao, Yongqing Zeng	p. 79-84 PDF

Modal analysis and applications

Critical natural frequency: an improved empirical effectiveness criterion in vibration stress relief of rectangle welded plates Shuqi Li, Hongyuan Fang, Wei Cui	p. 85-90 PDF
Critical natural frequency: an improved empirical effectiveness criterion in vibration stress relief of rectangle welded plates Shuqi Li, Hongyuan Fang, Wei Cui	p. 85-90 PDF
Determination of the modal parameters on the thin flat structures Roman Zajac, Aleš Prokop, Kamil Řehák	p. 91-95 PDF
Determination of the modal parameters on the thin flat structures Roman Zajac, Aleš Prokop, Kamil Řehák	p. 91-95 PDF
Parameter effecting the experimental determination of modal properties Kamil Rehak, Pavel Kucera, Ales Prokop	p. 96-100 PDF
Parameter effecting the experimental determination of modal properties Kamil Rehak, Pavel Kucera, Ales Prokop	p. 96-100 PDF

Vibration in transportation engineering

Engine fault feature extraction based on order tracking and VMD in transient conditions Gang Ren, Jide Jia, Jian Mei, Xiangyu Jia, Jiajia Han	p. 101-106 PDF
Engine fault feature extraction based on order tracking and VMD in transient conditions Gang Ren, Jide Jia, Jian Mei, Xiangyu Jia, Jiajia Han	p. 101-106 PDF
Simulation approach for a solution of turbocharger rotordynamic noise Pavel Novotny, Jozef Dlugos, Jozef Doman, Juraj Hlinik, Martin Jonak	p. 107-112 PDF
Simulation approach for a solution of turbocharger rotordynamic noise Pavel Novotny, Jozef Dlugos, Jozef Doman, Juraj Hlinik, Martin Jonak	p. 107-112 PDF
Transmission error analysis for heavy-duty gearbox Pavel Kučera, Václav Píštěk, Aleš Prokop, Kamil Řehák	p. 113-116 PDF
Transmission error analysis for heavy-duty gearbox Pavel Kučera, Václav Píštěk, Aleš Prokop, Kamil Řehák	p. 113-116 PDF
Investigation of an engine block load by means of crank train rotating parts Lubomír Drápal, Jan Vopařil	p. 117-122 PDF
Investigation of an engine block load by means of crank train rotating parts Lubomír Drápal, Jan Vopařil	p. 117-122 PDF
Experimental verification of the power required for the movement of the tracked vehicle Martin Jonák, David Hloušek, Kamil Řehák	p. 123-127 PDF
Experimental verification of the power required for the movement of the tracked vehicle Martin Jonák, David Hloušek, Kamil Řehák	p. 123-127 PDF
The consequence of using orthotropic material in a mechanical system Lukáš Zeizinger, Přemysl Pokorný	p. 128-131 PDF
The consequence of using orthotropic material in a mechanical system Lukáš Zeizinger, Přemysl Pokorný	p. 128-131 PDF
Complex approach to computations and analysis of vehicle dynamics Petr Porteš, Lubor Zháňal, Jan Fojtášek	p. 132-137 PDF
Complex approach to computations and analysis of vehicle dynamics Petr Porteš, Lubor Zháňal, Jan Fojtášek	p. 132-137 PDF
Heavy commercial vehicle yaw control simulation Jan Fojtášek	p. 138-143 PDF
Heavy commercial vehicle yaw control simulation Jan Fojtášek	p. 138-143 PDF
Computational modelling and measurement of vibration of power train mountings of a passenger car Jan Vopařil, Lubomír Drápal	p. 144-149 PDF
Computational modelling and measurement of vibration of power train mountings of a passenger car Jan Vopařil, Lubomír Drápal	p. 144-149 PDF

Flow induced structural vibrations

Numerical analysis on aerodynamic characteristics of short cylindrical terminal-sensitive bullet Yongliang Yang, Rui Guo, Rongzhong Liu, Zhenyan Guo, Yue Qu, Liang Chen	p. 150-156 PDF
Numerical analysis on aerodynamic characteristics of short cylindrical terminal-sensitive bullet Yongliang Yang, Rui Guo, Rongzhong Liu, Zhenyan Guo, Yue Qu, Liang Chen	p. 150-156 PDF
Hydroelasticity of three elastic coaxial shells interacting with viscous incompressible fluids between them under vibration Dmitry V. Kondratov, Olga V. Elistratova, Lev I. Mogilevich, Yulia N. Kondratova	p. 157-163 PDF
Hydroelasticity of three elastic coaxial shells interacting with viscous incompressible fluids between them under vibration Dmitry V. Kondratov, Olga V. Elistratova, Lev I. Mogilevich, Yulia N. Kondratova	p. 157-163 PDF

Oscillations in biomedical engineering

Assessment of dynamic effects on spine due to different dynamic loading or various seating position in a car Mária Tješšová, Milan Sokol, Petra Velísková	p. 164-169 PDF
Assessment of dynamic effects on spine due to different dynamic loading or various seating position in a car Mária Tješšová, Milan Sokol, Petra Velísková	p. 164-169 PDF

Measurements in engineering

Piston secondary motion measurement by laser displacement sensors Jozef Dlugoš, Pavel Novotný	p. 170-175 PDF
Piston secondary motion measurement by laser displacement sensors Jozef Dlugoš, Pavel Novotný	p. 170-175 PDF

Mathematical models in engineering

A novel control system design for automatic feed drilling operation of the PLC-based oil rig Li Zhong, Chen Yongkang, Song Lepeng, Zhang Junlin, Wang Huabin	p. 176-182 PDF
A novel control system design for automatic feed drilling operation of the PLC-based oil rig Li Zhong, Chen Yongkang, Song Lepeng, Zhang Junlin, Wang Huabin	p. 176-182 PDF
Calculation of the stress-strain state of the deflector rollers Assylkhan Alimbetov, Yerbol Kaliyev, Algazy Zhauyt, Gulsara Yestemessova, Saltanat Yussupova, Manas Nurbakyt	p. 183-188 PDF
Calculation of the stress-strain state of the deflector rollers Assylkhan Alimbetov, Yerbol Kaliyev, Algazy Zhauyt, Gulsara Yestemessova, Saltanat Yussupova, Manas Nurbakyt	p. 183-188 PDF
Numerical analysis of solid liquid two phase abrasive flow polishing process for three stage variable diameter pipe Jun Ye Li, Xiang Zang, Bin Yu Wang, Ji Kun Hou, Xin Ming Zhang, Hua Xiong	p. 189-193 PDF
Numerical analysis of solid liquid two phase abrasive flow polishing process for three stage variable diameter pipe Jun Ye Li, Xiang Zang, Bin Yu Wang, Ji Kun Hou, Xin Ming Zhang, Hua Xiong	p. 189-193 PDF
Structure design and surface interference analysis of double crown surface configuration of multistage face gears Xingbin Chen, Qingchun Hu, Zhongyang Xu, Chune Zhu	p. 194-200 PDF
Structure design and surface interference analysis of double crown surface configuration of multistage face gears Xingbin Chen, Qingchun Hu, Zhongyang Xu, Chune Zhu	p. 194-200 PDF
A method for describing large rotations with a combination of axial and transverse Euler vectors F. D. Sorokin, Hao Zhang	p. 201-206 PDF
A method for describing large rotations with a combination of axial and transverse Euler vectors F. D. Sorokin, Hao Zhang	p. 201-206 PDF
Supplying system abrasive material with automatic dosing control Mykola Gorbunov, Václav Píštěk, Maksym Kovtanets, Olena Nozhenko, Sergii Kara, Pavel Kučera	p. 207-214 PDF
Supplying system abrasive material with automatic dosing control Mykola Gorbunov, Václav Píštěk, Maksym Kovtanets, Olena Nozhenko, Sergii Kara, Pavel Kučera	p. 207-214 PDF
A loop unrolling method based on machine learning Hui Liu, Zhanjie Guo	p. 215-221 PDF
A loop unrolling method based on machine learning Hui Liu, Zhanjie Guo	p. 215-221 PDF
Calculation of mechanism motion using discrete time approach Lubor Zháňal, Petr Porteš	p. 222-225 PDF
Calculation of mechanism motion using discrete time approach Lubor Zháňal, Petr Porteš	p. 222-225 PDF
Heavy-duty transmission gear shift investigation by virtual prototypes Ales Prokop, Pavel Kucera, Kamil Rehak	p. 226-230 PDF
Heavy-duty transmission gear shift investigation by virtual prototypes Ales Prokop, Pavel Kucera, Kamil Rehak	p. 226-230 PDF