Journals
Conferences
About
Journals
Conferences
About
Search by keyword, title, subject area
Vibroengineering PROCEDIA
Browse Procedia
Vibroengineering PROCEDIA
Browse Procedia
Volume 33
Volume 33
Cover and Contents
Articles in Press
Other Issues
Vol. 38
Vol. 37
Vol. 36
Vol. 35
Vol. 34
Vol. 32
Vol. 31
Vol. 30
Vol. 29
October 19, 2020, Pages (1-203)
Previous vol/issue
Next vol/issue
Page Sections
Cover and Contents
Articles in Press
Other Issues
Vol. 29
Vol. 30
Vol. 31
Vol. 32
Vol. 34
Vol. 35
Vol. 36
Vol. 37
Vol. 38
Acoustics, noise control and engineering applications
Research article
2020-10-19
Identification of loose particles using deep learning convolutional network
Yanggang Li, Cai Meng, Guoqiang Zhang, Changxing Zhao
p. 130-135
Research article
2020-10-19
Research on simulation and optimization of vehicle road noise based on random method
Dayong Jiang, Zuokui Sun, Yongren Zhang, Bin Qiu, Xiongying Yu, Xiaoli Jia
p. 136-140
Dynamics and oscillations in electrical and electronics engineering
Research article
2020-10-19
Design and application of fuel injection drive circuit for engine test bench
Baoqing Deng, Yuchuan Jia, Zhang Bo, Zhenyu Deng, Zengfa Gao
p. 118-123
Research article
2020-10-19
FDTD analysis of transient fault induced travelling-wave propagation for multi-branch distribution networks
Minqiang Li, Baiyang Liu, Chen Wang, Kun Yu, Yongze Wu, Xiangjun Zeng
p. 124-129
Dynamics of Smart and functionally graded materials
Research article
2020-10-19
Experimental study on the static properties of single dimensional bidirectional bending joint
Hongbo Liu, Junye Li, Dexu Geng
p. 199-203
Fault diagnosis based on vibration signal analysis
Research article
2020-10-19
A sensor fault diagnosis method based on KPCA and contribution graph
Yuanqing Wang, Fan Deng
p. 6-10
Research article
2020-10-19
Neighborhood preserving discrimination for rotor fault feature data set dimensionally reduction
Kunju Shi, Peng Wu, Mingshuai Liu, Yuanjun Dai
p. 11-16
Research article
2020-10-19
Circular crack identification in plates based on natural frequency evaluation
Codruta Oana Hamat, Zeno-Iosif Praisach, Constantin-Ioan Barbinta, Zoltan-Iosif Korka, Gilbert-Rainer Gillich
p. 17-21
Flow induced structural vibrations
Research article
2020-10-19
Curved water flow characteristics and its influence on navigation
Haopeng Li, Hongcang Dong, Pengxiang Ji
p. 102-106
Research article
2020-10-19
Study on simulation of wind load characteristics for photovoltaic generation systems
Miao Wu, Xiaojun Zhou
p. 107-112
Research article
2020-10-19
Mode-superposition response spectrum method for wind-induced vibration analysis of structures
Yinfeng Dong, Xu Huang, Wengju Liang, Dong Li
p. 113-117
Materials and measurements in engineering
Research article
2020-10-19
Effect of molding technology and porosity on explosive combustion
Hong-Bin Li, Jian Yang, Peng-Gang Jin
p. 141-146
Mathematical models in engineering
Research article
2020-10-19
Optimal design parameters of air suspension systems for semi-trailer truck. Part 2: results and discussion
Nguyen Van Tuan, Le Van Quynh, Vi Thi Phuong Thao, Le Quang Duy
p. 147-152
Research article
2020-10-19
Numerical simulation research on s-shaped elbows polished by abrasive flow based on large eddy simulation
Weihong Zhao, Jiyong Qu, Qifei Peng, Ximing Hui, Junye Li, Dong Liang
p. 153-158
Research article
2020-10-19
Design and simulation of shear-tension spring-type quasi-zero stiffness isolator
Peicheng Shi, Jianfeng Yang, Jing Li, Ping Xiao
p. 159-163
Research article
2020-10-19
Study on hydraulic sand suction performance of suction cutter
Yuange Kong, Miao Wu, Lan Zhuang, Xiaojun Zhou
p. 164-169
Research article
2020-10-19
Temperature field analysis of fuel injection nozzle based on fluid-solid coupling method
Lan Zhuang, Jin Qian, Yuange Kong, Miao Wu, Xiaojun Zhou
p. 170-175
Research article
2020-10-19
An improved mesh stiffness calculation model of spur gear pair under mixed EHL friction with spalling effect
Siyu Wang, Rupeng Zhu
p. 176-181
Research article
2020-10-19
Numerical simulation analysis of PELE penetrating target plates with different thicknesses
Gang Wu, Xin Wang, Chong Ji, Changxiao Zhao, Haojie Zhu
p. 182-187
Mechanical vibrations and applications
Research article
2020-10-19
Study on response characteristics of rotor-bearing system under sudden base excitation load
Zhaojun Feng, Guihuo Luo, Zedong Yang, Nan Zheng, Wei Chen
p. 1-5
Modal analysis and applications
Research article
2020-10-19
Research on vibration response of a reducer of electric vehicle
Peiyun Xu, Huibin Li, Dongmei Hu, Cheng Cao
p. 60-65
Research article
2020-10-19
A python application to calculate the mode shapes of rectangular plates
Dorian Nedelcu, Constantin-Ioan Barbinta, Gilbert-Rainer Gillich, Zoltan-Iosif Korka, Cornel Hatiegan
p. 66-71
Seismic engineering and applications
Research article
2020-10-19
Liquefaction identification based on instantaneous H/V spectrum ratio
Dong Yinfeng, Li Dong, Rao Jianli, Huang Xu
p. 34-38
Research article
2020-10-19
Comparison on yield mechanism of strong column-weak beam of reinforced concrete frame structure
Hui Tian, Yinfeng Dong
p. 39-43
Research article
2020-10-19
Experimental research on seismic performance of cantilever structure of shear wall
Xuezhong Peng, Tinfeng Shi, Di Hu
p. 44-49
Research article
2020-10-19
Optimal design of a large-span spatial structure based on dynamic elastic-plastic analysis
Feipeng Liu, Xuejun Liu, Lvhe Dong, Hui Tian, Dong Li, Xu Huang
p. 50-54
Research article
2020-10-19
5-year monitoring of the dynamic properties of a 32-story SRC structure
Hui Tian, Yinfeng Dong, Dong Li
p. 55-59
System dynamics in manufacturing system modeling
Research article
2020-10-19
Design and analysis of gripper for automatic drilling machine
Huanhuan Pan
p. 188-192
Research article
2020-10-19
Dynamics analysis of a novel two-translation parallel mechanism
Hongzhou Wang, Mengmeng Song, Mengwei Li, Ru Yang, Zhen Jiang
p. 193-198
Vibration generation and control
Research article
2020-10-19
Backstepping control of a tank with a flexible barrel in motion
Zong Fan Wang, Guo Lai Yang
p. 22-27
Research article
2020-10-19
Eddy current damper capable of collecting electric energy
Wenbin Yu, Guolai Yang
p. 28-33
Vibration in transportation engineering
Research article
2020-10-19
Optimal design parameters of air suspension systems for semi-trailer truck. Part 1: modeling and algorithm
Nguyen Van Tuan, Le Van Quynh, Vi Thi Phuong Thao, Le Quang Duy
p. 72-77
Research article
2020-10-19
Effect of electric battery mass distribution on electric vehicle movement safety
Peiling Wang
p. 78-83
Research article
2020-10-19
Dynamic load of the carrying structure of an articulated wagon with new draft gear concepts
Oleksij Fomin, Alyona Lovska, Václav Píštěk, Pavel Kučera
p. 84-89
Research article
2020-10-19
Analysis of the control strategy of range extender system on the vehicle NVH performance
Jingchang Chen, Xiangzhen Kong, Peiran Li
p. 90-95
Research article
2020-10-19
Multi-objective optimization of CFRP engine hood considering dynamic performance based on surrogate model
Yunkai Gao, Jiaju Chen, Zhe Liu, Ze Yuan
p. 96-101
This website uses cookies to ensure you get the best experience on our website.
Learn more
Accept