Vibroengineering PROCEDIA

Browse Procedia
Vibroengineering PROCEDIA Browse Procedia Volume 28

Volume 28

Cover and Contents Articles in Press
October 19, 2019, Pages (1-263)
Previous vol/issue Next vol/issue

Acoustics, noise control and engineering applications

Research article
2019-10-19

Structural-acoustic modeling and analysis of an engineering machinery cab in the mid-frequency range

Can Gong, Renqiang Jiao, Vanliem Nguyen
p. 118-123
Research article
2019-10-19

Acoustic vibration response and power generation characteristics of airborne acoustic generator system

Zhipeng Li, Hejuan Chen
p. 124-129
Research article
2019-10-19

Development of test bench with airflow for resonator acoustic performance measurement

Rong Guo, Tiantian Mi
p. 130-135

Biomechanics and biomedical engineering

Research article
2019-10-19

Level set medical image segmentation aided by cooperative quantum particle optimization with Lévy flights

Desheng Li, Na Deng, Xu Chen
p. 93-98

Chaos, nonlinear dynamics and applications

Research article
2019-10-19

The control strength quantification analysis of outer pendulum rod for double inverted pendulum

Wencong Fu, Chan Wang, Peng Xu, Yuanhong Dan
p. 99-104

Dynamics and oscillations in electrical and electronics engineering

Research article
2019-10-19

Electromagnetic buffering considering PM eddy current loss under intensive impact load

Zi-Xuan Li, Guo-Lai Yang, Lei Li
p. 105-110
Research article
2019-10-19

Design and analysis of magnetic circuit of permanent magnet eddy current brake

Yumeng Fan, Guolai Yang
p. 111-117

Fault diagnosis based on vibration signal analysis

Research article
2019-10-19

Vibration-based damage growth monitoring in beam-like structures

Ganggang Sha, Maosen Cao, Jingqiang Liu, Rohan Soman, Maciej Radzieński, Wiesław Ostachowicz
p. 12-17
Research article
2019-10-19

An intelligent bearing fault diagnosis method based on the AFEEMD and 1D CNNs

Zhaoyang Wang, Hongchun Sun
p. 18-23
Research article
2019-10-19

Fault identification technology for gear tooth surface wear based on MPE method by MI and improved FNN algorithm

Xintao Zhou, Yahui Cui, Xiayi Liu, Longlong Li, Lihua Wang
p. 24-29
Research article
2019-10-19

Nonlinear crack assessment method in beams based on bispectrum-normal cloud model

L. Cui, E. Manoach, W. Xu, L. X. Pan, M. S. Cao
p. 30-34
Research article
2019-10-19

Identification and location of ship pipeline leakage based on VMD

Jiechang Wu, Yannan Li, Shuyong Liu, Xuejiao Feng
p. 35-39
Research article
2019-10-19

Damage detection in sluice hoist beams subject to excitation at resonance frequency band based on local primary frequency

Q. Y. Wei, W. Xu, D. Novák, R. Pukl, D. Y. Li, M. S. Cao
p. 40-45

Flow induced structural vibrations

Research article
2019-10-19

On-site vibration test and dynamic response analysis of wind turbine of intertidal zone

Shuai Huang, Yuejun Lyu, Yanju Peng, Haijun Sha
p. 87-92

Materials and measurements in engineering

Research article
2019-10-19

Experimental study on ground vibration response in gun firing environment

Baoyuan Wang, Qiang Lei, Dongying Wang
p. 136-141
Research article
2019-10-19

Study on dynamic characteristic of closed-cell aluminum foam

Qiang Lei, Junlong Ren, Hongyi Ren, Hongxiao Chao, Wenbin Du
p. 142-147
Research article
2019-10-19

Shadow effect compensation method for ultrasonic transducer array model

Yingpeng Yang, Xiao Chen
p. 148-153
Research article
2019-10-19

Research on vibration displacement test method for large-caliber artillery muzzle

Shili Li, Hongxiao Chao, Dongying Wang, Junlong Ren
p. 154-159
Research article
2019-10-19

Study on penetration characteristics of honeycomb aluminum

Wenbin Du, Hongxiao Chao, Qiang Lei, Junlong Ren, Dongyin Wang
p. 160-164

Mathematical models in engineering

Research article
2019-10-19

Temperature stress of waste bunker in municipal solid waste incineration power generation plant

Qi Wu, Yinfeng Dong, Jianli Rao
p. 165-170
Research article
2019-10-19

Effect of temperature stress on main structure in waste incineration power generation plant

Jianli Rao, Yinfeng Dong, Qi Wu
p. 171-176
Research article
2019-10-19

Magneto-thermal coupling analysis of the permanent magnet eddy current brake under intensive impact load

Lei Li, Guo-Lai Yang, Zi-Xuan Li
p. 177-182
Research article
2019-10-19

Creep modeling of asperities on joint surface and its effect on joint surface stiffness

Cheng Zhang, Jian-run Zhang
p. 183-188
Research article
2019-10-19

Uncertain optimization of in-bore launching performance of artillery based on interval method

Fengjie Xu, Guolai Yang
p. 189-194
Research article
2019-10-19

Safety evaluation method of bridge plate rubber bearing based on SVM

Chen Liu, Yongjun Ni
p. 195-200
Research article
2019-10-19

Fixed point problems of nonexpansive mappings for nononvex set in Hilbert spaces

Xianbing Wu
p. 201-205
Research article
2019-10-19

Safety study of cast-in-situ support for double track railway on wide channel beam bridge

Zhenxuan Yu, Junshun Liang, Shuo Jiang, Shixin Li, Chao Zou
p. 206-210
Research article
2019-10-19

Dynamics similarity design and verification of rotor system

Lijia Chen, Guihuo Luo, Jiaqi Han, Xi Kuang, Nan Zheng, Xuemin Liao
p. 211-216
Research article
2019-10-19

Investigation and optimization of the cable force of a combined highway and railway steel truss cable-stayed bridge in completion state

Haohong Li, Shuyang Liu, Qiuwei Shan, Liangliang Zhang, Bo Wu
p. 217-222
Research article
2019-10-19

Effects of the wide-body suspension bridge auxiliary structure on flutter characteristics by CFD

Zhijun Ni, Cong Zhang, Liangliang Zhang, Lianjie Liu
p. 223-229

Mechanical vibrations and applications

Research article
2019-10-19

On the issue of acceleration of the compensating mass in an automatic balancing device with a horizontal axis of rotation

Guntis Strautmanis, Mareks Mezitis, Valentina Strautmane, Alexander Gorbenko
p. 1-5
Research article
2019-10-19

Defect elimination in torsional harmonic reducer based on harmonic resonance

Dishan Huang, Peng Zong, Jingjun Gu
p. 6-11

Modal analysis and applications

Research article
2019-10-19

Modal analysis application for the problemof gamma-ray spectrometers resolution improving

Vladislav Malgin, Oļegs Jakovļevs, Jānis Vība
p. 69-74

Seismic engineering and applications

Research article
2019-10-19

Study on blast-induced vibrations of a tunnel cross section

Xu Jiangbo, Yan Changgen, Bao Han, Yu Pengtao
p. 58-63
Research article
2019-10-19

Experimental determination on the critical angle of seismic incidence of curved bridge

Tongfa Deng, Weibin Li, Ruiwei Feng, Yi Wang
p. 64-68

System dynamics in manufacturing system modeling

Research article
2019-10-19

Static analysis of dynamic servo tool rest considering the influence of precision error

Xiaolei Li, Mingjun Chen
p. 230-235
Research article
2019-10-19

Predictions of input pinion floating on concentric face gear transmission static load sharing

Si Li, Zhengminqing Li, Xin Tang, Wenlin Zhu, Meijun Liao
p. 236-240
Research article
2019-10-19

Construction of 12 DOFs spur gear coupling dynamic model

Huanchao Lv, Zhengminqing Li, Wenlin Zhu, Xin Tang, Jie Gao, Rupeng Zhu
p. 241-245
Research article
2019-10-19

Dynamic characteristics of aero-engine’s rotor under large maneuvering flight

Nan Zheng, Gui-Huo Luo, Xi Kuang, Li-Jia Chen, Xue-Min Liao
p. 246-251
Research article
2019-10-19

Research on the dynamic characteristics of the squeeze film damper of a certain aero-engine

Xue-Min Liao, Gui-Huo Luo, Zhao-Jun Feng, Li-Jia Chen, Nan Zheng
p. 252-257
Research article
2019-10-19

Linear forced-rotordynamics analysis for optimizing the performance factors of machine motorized spindle using design explorer method

Elhaj A. I. Ahmed, Li Shusen, Wasim M. K. Helal, Abdelrahman I. A. Eisa
p. 258-263

Vibration generation and control

Research article
2019-10-19

Study on multi-axis sine vibration test control techniques

Hanping Qiu, Yaoqi Feng, Shichao Fan, Xiaozhou Du, Wenbing Zhang
p. 46-51
Research article
2019-10-19

Design of vibration standard device based on random comparison method

Tao Gao, Chen Lu, Pu Chen, Meng Li, Mei Han
p. 52-57

Vibration in transportation engineering

Research article
2019-10-19

Improving ride comfort for vibratory roller utilizing semi-active hydraulic cab mounts with control optimization

Renqiang Jiao, Vanliem Nguyen
p. 75-80
Research article
2019-10-19

Influence of mass unbalancing of three-cylinder engine on idle vibration based on powertrain model

Rong Guo, Ziwei Zhou
p. 81-86