Vibroengineering PROCEDIA

Volume 49

May 18, 2023, Pages (1-252)

Biomechanics and biomedical engineering

Research article

2023-05-18

Design and research of single leg walking mechanism of quadruped robot

Ruiqin Hao, Cheng Guo, Zeguang Han, Yu Han

p. 130-135

Chaos, nonlinear dynamics and applications

Research article

2023-05-18

On attractors in systems of ordinary differential equations arising in models of genetic networks

Olga Kozlovska, Felix Sadyrbaev

p. 136-140

Dynamics and oscillations in electrical and electronics engineering

Research article

2023-05-18

Development of a multi-layer cylindrical rotating electret generator with increased power densit

Yongling Lu, Zhen Wang, Xueqiong Zhu, Ziquan Liu, Hai Xue, Ziyang Zhang

p. 141-146

Research article

2023-05-18

Influence of an external alternating electromagnetic field on convective flows in the bath of an ore-thermal furnace during the melting of oxide refractory materials

Yerkesh Abdrakhmanov, Galym Kalimbetov

p. 147-152

Dynamics of Smart and functionally graded materials

Research article

2023-05-18

Enhancing model estimation accuracy and convergence rate in hysteresis modeling of MFC actuators using modified differential evolution algorithm

Hafiz Muhammad Umar, Ruichen Yu, Zhiyuan Gao, Hesheng Zhang

p. 246-252

Flow induced structural vibrations

Research article

2023-05-18

Study on dynamical characteristics of cooling fluid in engine piston

Investigation on the flow-induced tangential force characteristic of labyrinth seals under different operation parameters

Qianlei Gu, Jiangang Yang

p. 117-122

Research article

2023-05-18

Fluid-induced vibration analysis of pipe based on the transfer matrix method and added mass, added damping analogy method

Chao Gao, Yulong Zhou, Shunfeng Zhang, Shuangxia Shi, Bin Xiao, Zhigang Liu

p. 123-129

Materials and measurements in engineering

Research article

2023-05-18

To the mechanism of influence of an alternating electromagnetic field on crystallization process of oxide refractory melts

Yerkesh Abdrakhmanov, Anara Yegzekova, Zhanybek Kaliyev

p. 153-159

Research article

2023-05-18

Simulation of the measurement and control system of the electrostatic suspension inertial sensor

Jianhe Liu, Wenhao Huang, Yuqi Chen

p. 160-166

Research article

2023-05-18

Research on microstructure and properties of Cu-0.41%Cr-0.20%Zr alloy after solution-aging treatment

Mei Zhao, Ling Wang, Meng Li, Yufei Cao

p. 167-173

Research article

2023-05-18

Research on the influence of high temperature oxidation environment on the properties of C/C composite material

Jingyi Zhou, Zhihong Tan, Jiale Shi

p. 174-179

Research article

2023-05-18

The effect of an osmotic crystalline surface protectant agent on the performance of cement fly ash stabilized Aeolian sand bases

Changfeng Sun, Ke Wang

p. 180-185

Research article

2023-05-18

Application of CPT test in the evaluation of the test effect of lime soil compacting pile

Impact of cement and filler-asphalt ratio on the properties of asphalt mortar

Mei Song, Suining Zheng, Haichen Mi, Peng Xu, Chongshang Zhang

p. 192-198

Research article

2023-05-18

Synthesis of copper-doped indium zinc sulfide nanosheets for high efficiency photocatalytic hydrogen production

Lei Chen, Zongwen Chen

p. 199-204

Research article

2023-05-18

Uncertain optimization for composite base plate of mortar under impact load

Fengfeng Wang, Guolai Yang, Fengjie Xu

p. 205-211

Research article

2023-05-18

Evaluation of failure criteria for residual tensile strength of composite laminates with circular holes

Botao Hu, Xiangming Chen, Fanchen Deng, Xiaobo Sun

p. 212-219

Mathematical models in engineering

Research article

2023-05-18

Pitch stability of offshore waste collection platform hull with NACA fin stabilizers

Ziqi Wen, Mingqing Si, Chun Wang, Fuqin Yang

p. 220-226

Research article

2023-05-18

Optimization of process parameters for acid fracturing assisted herringbone well SAGD

Xi Yi, Guangsheng Cao, Jiaqi Tang

p. 227-232

Research article

2023-05-18

Numerical analysis of random vibration fatigue for a typical airborne equipment

Man Wang

p. 233-238

Mechanical vibrations and applications

Research article

2023-05-18

Vibration reduction design for a shared bearing bore of a turboshaft engine

Yu Lu, Zhen Huan Tang, Fei Wang

p. 1-7

Research article

2023-05-18

Dynamic characteristics analysis of a coaxial rotor system with shared bearing bore structure

Yu Lu, Zhen Huan Tang, Fei Wang

p. 8-15

Research article

2023-05-18

Substantiating the excitation conditions of a two-module vibration-driven locomotion system with two unbalanced rotors

Vitaliy Korendiy, Rostyslav Predko, Oleh Kotsiumbas, Vasyl Lozynskyy, Ihor Nazar, Mykola Ostashuk

p. 16-22

Research article

2023-05-18

Dynamic modeling and analysis of a vibration-driven robot driven by a conical dielectric elastomer actuator

Xiaojian Wang, Hongguang Li

p. 23-29

Research article

2023-05-18

Case study of vibration in a mobile milling machine

James Rowe, Christopher Langrand, Roger Debuchy

p. 30-37

Research article

2023-05-18

Analyzing the possibilities of generating the reciprocating motion and plane oscillations of a working member of a vibratory lapping-polishing machine

Vitaliy Korendiy, Viktor Zakharov, Igor Kuzio, Volodymyr Borovets, Oleksandr Havrylchenko, Yaroslav Danylo

p. 38-44

Modal analysis and applications

Research article

2023-05-18

Study on vibration characteristics of badminton racket embedded in acoustic black hole structure

Yuqi Li, Renqiang Jiao, Beiping Zhang, Bowen Dong, Vanliem Nguyen, Aoya Li

p. 67-72

Research article

2023-05-18

Dynamics analysis of the nonlinear rotor system with Geislinger coupling

Jinhong Wang, Zhenping Li, Hongguang Li, Wendi Zhang, Ke Bao

p. 73-79

Seismic engineering and applications

Research article

2023-05-18

Shaking table test on the dynamic responses of shield tunnel in liquefiable stratum

Dynamic response of tunnel through water-rich liquefiable layer based on UBC3D-PLM model

Seismic responses of functionally graded concrete piers with double plastic hinges

Jiangdong Deng, Fang Zhang

p. 56-61

Research article

2023-05-18

Analysis of ground motion measurement data under engineering blasting condition

Shiqian Song, Yongxiang Shi, Zengyue Li, Xiaofei Huang, Yuanding Xing

p. 62-66

System dynamics in manufacturing system modeling

Research article

2023-05-18

The structural dimension parameter optimization method of tapered roller bearings for wind power gearbox

Ruiqin Hao, Yan Li, Zeguang Han, Yu Han

p. 239-245

Vibration in transportation engineering

Research article

2023-05-18

Research of the operation of the turnstile support-fastening device during the transportation of a long-dimensional heavy load

Janat Musayev, Vladimir Solonenko, Algazy Zhauyt, Seitbek Zhunisbekov, Gulbarshyn Smailova, Toty Buzauova

p. 80-85

Research article

2023-05-18

Dynamic analysis on the structure of metro station under high-speed railway load

Weiying Wang, Quanqiang Huang, Ke Pan, Jinmei Li

p. 86-92

Research article

2023-05-18

Fatigue test study of weathering steel-concrete composite beam under corrosive environment

Nengwu Liao, Longxian Huang, Hong Li, Xianxi Hu, Bin Guo, Liangliang Zhang

p. 93-97

Research article

2023-05-18

An empirical formula for the accumulative deformation of saturated clay under different cyclic loading frequencies

Qiang Bu, Ying Zhou, Yang Zhou, Liang Wang, Lisheng Qin, Mingjie Yang

p. 98-103

Research article

2023-05-18

Effective acceleration design for solving excessive vibration in the cockpit

Juncheng Shu, Erming He, Yongzhi Li

p. 104-109