Journal of Vibroengineering

Volume 15, Issue 4

December 31, 2013, Pages (1627-2156)

Research article

2013-12-31

Mean change-point model for aero-engine component faults

Yu Fu, Hongfu Zuo, Jing Cai, Yibing Yin

p. 1627-1633

Research article

2013-12-31

Mesoscopic numerical simulation of the mechanical properties of concrete creep

Effects of shrink range and preload on dynamics characteristics of anti-backlash geared rotor-bearing system with composite mesh stiffness

Zheng Yang, Jianzhong Shang, Naihui Yu, Zirong Luo, Xiaoming Wang

p. 1642-1655

Research article

2013-12-31

Ride comfort analysis of a nonlinear vehicle excited by the consecutive speed-control humps

Shan Liang, Yongsheng Sun, Qin Zhu, Zhiyong Yang, Cheng Zeng

p. 1656-1664

Research article

2013-12-31

Dynamic responses of a 2R manipulator in zero-gravity state excited by ender impacts and base motions

Qingpeng Han, Hao Zhang, Jinguo Liu, Qingkai Han

p. 1665-1679

Research article

2013-12-31

Research on structure, propagation and exposure to general vibration in passenger car for different damping parameters

Rafał Burdzik, Łukasz Konieczny

p. 1680-1688

Research article

2013-12-31

Vibration analysis of a beam on a moving vehicle under the road excitation with different contact models

S. Q. Wu, H. X. Ai, Y. Z. Guo, Q. G. Fei

p. 1689-1700

Research article

2013-12-31

Railway traffic induced vibrations: comparison of analytical and finite element models

J. I. Real, T. Asensio, L. Montalbán, C. Zamorano, T. Real

p. 1701-1710

Research article

2013-12-31

Computational study on aerodynamic characteristics of a flying wing MAV

Hongming Cai, Zhilin Wu, Tianhang Xiao, Shuanghou Deng

p. 1711-1718

Research article

2013-12-31

Strengthening a tube connected building group by base isolators and story isolators

Z. D. Yang, Eddie S. S. Lam

p. 1719-1730

Research article

2013-12-31

Effect of engine thrust on nonlinear flutter of wings

Chen Quanlong, Han Jinglong, Yun Haiwei

p. 1731-1739

Research article

2013-12-31

An efficient optimized independent component analysis method based on genetic algorithm

Liangmin Li, Guangrui Wen, Jingyan Ren, Xiaoni Dong, Lin Liang

p. 1740-1751

Research article

2013-12-31

Impulsive noise cancellation of acoustic emission signal based on iterative mathematical morphology filter

Denghong Xiao, Tian He, Qiang Pan, Xiandong Liu, Yingchun Shan

p. 1752-1764

Research article

2013-12-31

Characteristic analysis of looseness-rubbing coupling fault in dual-disk rotor system

Yang Liu, Xing-Yu Tai, Qin-Liang Li, Li-Yuan Dong, Bang-Chun Wen

p. 1765-1777

Research article

2013-12-31

Dynamics of mass-spring-belt friction self-excited vibration system

Xiaopeng Li, Guanghui Zhao, Xing Ju, Yamin Liang, Hao Guo

p. 1778-1789

Research article

2013-12-31

Modeling and dynamic analysis of rotating composite shaft

Ren Yongsheng, Dai Qiyi, Zhang Xingqi

p. 1790-1806

Research article

2013-12-31

Numerical simulation of rock fragmentation process by roadheader pick

Jiang Hongxiang, Liu Songyong, Du Changlong, Gao Kuidong

p. 1807-1817

Research article

2013-12-31

Free vibration analysis of suspended super long span CFRP cables

Libin Wang, Xiaoyi Guo, Mohammad Noori, Dongming Feng

p. 1818-1825

Research article

2013-12-31

Gear fault diagnosis using vibration signals based on decision tree assisted intelligent controllers

Krishnakumari Aharamuthu, Elayaperumal Ayyasamy

p. 1826-1837

Research article

2013-12-31

Prediction and experimental study on structure and radiation noise of subway gearbox

Lin Tengjiao, He Zeyin, Geng Feiyu, Mao Youjun

p. 1838-1846

Research article

2013-12-31

Foot stiffness under different speed compression. Experimental study

Raminta Sakalauskaitė, Danguolė Satkunskienė, Aurelijus Domeika, Egidijus Kontautas

p. 1847-1852

Research article

2013-12-31

Model-based design of motorized spindles with different bearing configurations

Xiaoan Chen, Junfeng Liu

p. 1853-1865

Research article

2013-12-31

Constructional damping mounting influence on T type frame vibrations

Wojciech Sochacki, Piotr Rosikoń, Sandra Topczewska

p. 1866-1872

Research article

2013-12-31

The machine abnormal degree detection method based on SVDD and negative selection mechanism

Hongli Zhang, Shulin Liu, Wenhui Jiao, Dong Li, Bo Wang

p. 1873-1884

Research article

2013-12-31

A comparison of different methods for determination of coupling factor and velocity response of coupled plates

Achuthan C. Pankaj, Sridhar Sastry, S. M. Murigendrappa

p. 1885-1897

Research article

2013-12-31

Application of sound loudness research in structural-acoustic coupling cavity with impedance and mobility approach method

A method for machine condition classification based on Hilbert spectrum quantitative analysis and support vector machine

Hongkun Li, Hongyi Liu, Xuefeng Zhang, Fujian Xu

p. 1913-1926

Research article

2013-12-31

A stability analysis of turning process considering the workpiece as a Timoshenko beam

He Li, Guangying Song, Junfeng Hou, Shuo Li, Bangchun Wen

p. 1927-1939

Research article

2013-12-31

Theoretical foundations of the methods and means of increasing the efficiency of vibration diagnostics of power equipment

An analytical method for vibro-impact between shrouded blades under a multiple-harmonic excitation

Reliability assessment based on an adaptive response surface method considering correlation among random variables

Taejun Cho, Changhwan Jang, Jeongbae Lee, Seongsoo Kim

p. 1961-1971

Research article

2013-12-31

Modeling and experiments of rotor system with oil-block inside its drum cavity

Jingyu Zhai, Hao Zhang, Qingkai Han, Deyou Wang, Yongquan Liu

p. 1972-1982

Research article

2013-12-31

Numerical investigation of dynamical properties of vibroactive pad during hot imprint process

B. Narijauskaitė, A. Palevičius, G. Janušas, R. Šakalys

p. 1983-1990

Research article

2013-12-31

Dynamic simulation of nonlinear vibration on large horizontal axis turbine blades using a finite differential method

You-Feng Zhu, Yong-Sheng Ren, Qi-Yi Dai

p. 1991-2002

Research article

2013-12-31

Horizontal linear vibrating actuator to reduce smart phone thickness

Ki Bum Lee, Jae Hee Kim, Jin Ho Kim

p. 2003-2011

Research article

2013-12-31

Semi-active control system for magneto-rheological damper based on the identification model with fuzzy neural network

Jiannan Yao, Xingming Xiao, Yunjiang Miao, Chi Ma

p. 2012-2021

Research article

2013-12-31

Measurement of stresses in the vibrating elements of a printing device

V. Bivainis, E. Kibirkštis, L. Gegeckienė, V. Miliūnas, N. Buškuvienė, L. Ragulskis

p. 2022-2028

Research article

2013-12-31

Research of pathology degree and kind influence on the stress in damaged blood vessels areas

M. Mariūnas, Z. Kuzborska, A. Šešok

p. 2029-2034

Research article

2013-12-31

Dimensional evaluation of metal discontinuities by geometrical parameters of their patterns on imaging flaw detector monitor

A. A. Samokrutov, V. G. Shevaldykin

p. 2035-2041

Research article

2013-12-31

Application of the vibration test in the evaluation of the technical condition of shock absorbers built into the vehicle

Łukasz Konieczny, Rafał Burdzik, Bogusław Łazarz

p. 2042-2048

Research article

2013-12-31

Numerical calculation and experimental research of pressure fluctuation in the pump under different operating conditions

Chuan Wang, Suqing Wu, Weidong Shi, Jie Yao

p. 2049-2056

Research article

2013-12-31

Study of the mitigation of tram-induced vibrations on different track typologies

J. Real, C. Zamorano, T. Asensio, T. Real

p. 2057-2075

Research article

2013-12-31

Investigation of the adequacy of the acoustic field model in the closed space

R. Mikalauskas, V. Volkovas

p. 2076-2082

Research article

2013-12-31

Experimental dynamics research on a rotor bearing system with two rub-impact faults

Chaofeng Li, Shihua Zhou, Jie Liu

p. 2083-2095

Research article

2013-12-31

The study of the dynamic properties of some structural components of harmonic drive

Identification of inertia force between cantilever beam and moving mass based on recursive inverse method

Hao Yan, Qiang Chen, Guolai Yang, Rui Xu, Minzhuo Wang

p. 2103-2113

Research article

2013-12-31

Research on the influence of engine rotational speed to the vibration penetration into the driver via feet – multidimensional analysis

Development of two modifications of piezoelectric high resolution rotary table

R. Bansevičius, A. Bubulis, I. Grybas, V. Jūrėnas, G. Kulvietis

p. 2124-2129

Research article

2013-12-31

Research on active sound absorption based on minimality of quadratic sum of reflected sound pressure in low frequency

Congyun Zhu, Jianru Shi, Shufeng Yang, Qibai Huang

p. 2130-2145

Research article

2013-12-31

Effect of non-homogeneity on free vibration of visco-elastic rectangular plate with varying structural parameters

Anupam Khanna, Narinder Kaur

p. 2146-2155

Erratum

2013-12-31

Erratum (Publisher’s note regarding paper 954)

p. 2156-2156