Journal of Vibroengineering

Volume 19, Issue 2

March 31, 2017, Pages (724-1464)

Acoustics, noise control and engineering applications

Research article

2017-03-31

Numerical simulation and experimental research of spectral noise characteristics for the four-wheel landing gear

Ting Li, Jin-hua Zhang, Bao-zeng Wang, Tao Xue

p. 1428-1437

Research article

2017-03-31

Research on the distribution of aerodynamic noises of high-speed trains

Wei Te Lu, Yan Wang, Chun Qin Zhang

p. 1438-1452

Chaos, nonlinear dynamics and applications

Research article

2017-03-31

Instability behaviors of a cylinder array under both increasing and decreasing flow velocities

Xu Zhang, Bin Jiang, Xiaoming Xiao

p. 1393-1408

Fault diagnosis based on vibration signal analysis

Research article

2017-03-31

Analytical study of local damage on concrete slab subjected to a contact explosion

Singlin Yue, Yanyu Qiu, Ning Zhang, Mingyang Wang

p. 908-929

Research article

2017-03-31

Cracked modeling and vibration analysis of pipe with a part-through crack

Zhihong Yu, Laibin Zhang, Jinqiu Hu, Jiashun Hu

p. 930-942

Research article

2017-03-31

Fault diagnosis of rotating machinery based on time-frequency decomposition and envelope spectrum analysis

Yonggen Chang, Fan Jiang, Zhencai Zhu, Wei Li

p. 943-954

Research article

2017-03-31

A novel scheme on multi-channel mechanical fault signal diagnosis based on augmented quaternion singular spectrum analysis

Yong Lv, Bo He, Cancan Yi, Zhang Dang

p. 955-966

Research article

2017-03-31

Experimental investigation on electrostatic monitoring technology for civil turbofan engine

Yibing Yin, Jing Cai, Hongfu Zuo, Huijie Mao, Yu Fu, Hongsheng Yan

p. 967-987

Research article

2017-03-31

Wheel vibration estimation of railway vehicle utilizing state observer

Shu-bin Zheng, Xiao-dong Chai, Le-le Peng, Li-ming Li

p. 988-999

Research article

2017-03-31

Virtual sensing for gearbox condition monitoring based on extreme learning machine

Jinjiang Wang, Yinghao Zheng, Lixiang Duan, Junyao Xie, Laibin Zhang

p. 1000-1013

Research article

2017-03-31

Teager-Kaiser energetic trajectory for machine diagnosis purposes

Free vibration study of v-shape and rectangular shape double-sided cracks in a cantilever beam

V. Khalkar, S. Ramachandran

p. 1026-1038

Research article

2017-03-31

Vibroacoustic technique for the fault diagnosis in a gear transmission of a military helicopter

Mariusz Zieja, Pawel Golda, Mariusz Zokowski, Pawel Majewski

p. 1039-1049

Flow induced structural vibrations

Research article

2017-03-31

Aerodynamic performance analysis of wind-sand flow on riding-type hangers of suspension bridges

Shengli Li, Shunyun Zheng

p. 1301-1313

Research article

2017-03-31

Based on lacing wires influence of coupling vibration of a multi flexible disks turbine rotor system by two methods

Yi-Jui Chiu, Sheng-Rui Jian, Chia-Hao Yang, Guo-Fei Yu

p. 1314-1331

Research article

2017-03-31

Radial force within two-stage axial-flow blood pump based on LES

Xiaohu Sang, Xiaojun Zhou, Xiaoguang Liu, Xiaoru Hao

p. 1332-1344

Research article

2017-03-31

Experimental study on characteristics of self-excited oscillation pulsed water jet

Zhe Zhou, Zhaolong Ge, Yiyu Lu, Xinwei Zhang

p. 1345-1357

Research article

2017-03-31

Experimental study of vortex-induced vibration for drilling risers under uniform flow current

Liangjie Mao, Qingyou Liu, Shouwei Zhou, Zugang Long

p. 1358-1371

Fractional dynamics and applications

Research article

2017-03-31

Bursting oscillation and bifurcation mechanism in fractional-order Brusselator with two different time scales

Jufeng Chen, Xianghong Li, Jingyu Hou, Dawei Zuo

p. 1453-1464

Mechanical vibrations and applications

Research article

2017-03-31

Effective computational model for a solution of turbocharger rotor dynamics

Pavel Novotny, Jozef Dlugoš, Aleš Prokop, Kamil Řehák, Peter Raffai

p. 724-736

Research article

2017-03-31

Study on the nonlinear transient response for the non-contact mechanical face seal

Yao Chen, Guoyuan Zhang, Weigang Zhao, Feng Ji

p. 737-750

Research article

2017-03-31

An improved state space method for force identification based on function interpolation in the presence of large noise

Ting Wang, Zhimin Wan, Weiguang Zheng

p. 751-768

Research article

2017-03-31

Study of the optimization of matching between torsional vibration damper and elastic coupling based on energy method

Xiaodong Tan, Lin Hua, Chihua Lu, Can Yang, Yongliang Wang

p. 769-782

Research article

2017-03-31

Extending the modal incremental dynamic analysis method for structures equipped with viscoelastic dampers

Elyar Zafarkhah, Morteza Raissi Dehkordi

p. 783-800

Research article

2017-03-31

Dynamics characteristics of a rotary table motorized spindle with externally pressurized air bearings

Chundong Xu, Shuyun Jiang

p. 801-811

Research article

2017-03-31

Improved Craig-Bampton method for transient analysis of structures with large-scale plastic deformation

Peng-bo Qian, Lin-fang Qian, Xiao-chun Yin

p. 812-830

Research article

2017-03-31

Multi-objective topology optimization to reduce vibration of micro-satellite primary supporting structure

Luyang Tan, Lin Li, Song Gu, Dong Wang

p. 831-843

Research article

2017-03-31

Vibration analysis of a cylinder with slight diameter and thickness variations

Heye Xiao, Jie Pan, Zhijun Zhao, Jiawen Chen

p. 844-863

Research article

2017-03-31

System identification of force transducers for dynamic measurements using particle swarm optimization

Analysis and prediction on the cutting process of constrained damping boring bars based on PSO-BP neural network model

Xianming Chen, Tieliu Wang, Mingming Ding, Jing Wang, Jianqing Chen, Jun Xia Yan

p. 878-893

Research article

2017-03-31

Research on transverse vibration characteristics of rope change device with clamping chain transmission in lifting system

Baofu Kou, Qiuzu Liu, Ning Li

p. 894-907

Modal analysis and applications

Research article

2017-03-31

Influences of physical and structural parameters on vibration modes for large-scale rotating wind turbine blades

Jianping Zhang, Fengfeng Shi, Helen Wu, Jianxing Ren, Hao Wang, Danmei Hu

p. 1173-1184

Research article

2017-03-31

Adaptive estimation of VMD modes number based on cross correlation coefficient

Hongbai Yang, Shulin Liu, Hongli Zhang

p. 1185-1196

Oscillations in biomedical engineering

Research article

2017-03-31

Numerical investigation on the propulsive performance of flexible flapping fins using CFD/CSD method

Long Liu, Haisong Ang

p. 1372-1382

Research article

2017-03-31

Design and the main parameters of tube-shaped ultrasound wave guide wire

Algimantas Bubulis, Vladimir Minchenia, Vincentas Veikutis, Jonas Navickas, Vytautas Bakanauskas, Paulius Palevičius

p. 1383-1392

Oscillations in electrical engineering

Research article

2017-03-31

Torque and thermal characteristics analysis of a fluid damping based multi-degree-of-freedom motor

Zheng Li, Wei Nie, Ruodong Zhi, Zengtao Xue, Qunjing Wang

p. 1409-1427

Seismic engineering and applications

Research article

2017-03-31

Seismic performance of steel frames equipped with buckling-restrained braces (BRBs) using nonlinear static and dynamic analyses

Mahdi Eghbali, Esmaeil Asadian, Gholamreza Ghodrati Amiri, Seyed Ali Razavian Amrei

p. 1131-1146

Research article

2017-03-31

Damage mechanism of stabilizing piles suffered from liquefaction based on dynamic numeric analyses

Rong-jian Li, Han Luo, Jun-ding Liu, Ya-lin Wang

p. 1147-1157

Research article

2017-03-31

Effect of using linear multiple tuned mass dampers on concrete structures with hysteresis behavior

Mohammad Shooshtari, Hamid Mortezaie

p. 1158-1172

Vibration generation and control

Research article

2017-03-31

Fluctuation characteristics and rolling control for an underactuated spherical underwater exploration robot

Yansheng Li, Meimei Yang, Hanxu Sun, Zhimin Liu

p. 1050-1061

Research article

2017-03-31

The stability analysis of separated feed ultrasonic milling

Yuemin Zhang, Bo Zhao, Yuqing Wang, Binbin Zhao

p. 1062-1073

Research article

2017-03-31

Vibration and aeroelastic control of wind turbine blade based on B-L aerodynamic model and LQR controller

Analysis of multiple oscillations in a sampling reduced-order sliding mode control in frequency domain

Chaos control of a multi-dimensional chaotic mapping system by modified stability transformation method

Jilei Zhou, Canchang Liu, Chuanbo Ren

p. 1103-1115

Research article

2017-03-31

Adaptive backstepping sliding mode control for heavy-weight airdrop operations

Ri Liu, Xiuxia Sun, Wenhan Dong, Xuning Guan

p. 1116-1130

Vibration in transportation engineering

Research article

2017-03-31

Modeling of dynamic characteristics of freight car withoptimized parameters of wedge-type shock absorber

Vladimir Solonenko, Narzankul Mahmetova, Janat Musayev, Mikhail Kuashnin, Algazy Zhauyt, Toty Buzauova

p. 1197-1213

Research article

2017-03-31

Optimization of vibration reduction of the rubber floating-slab tracks

Hao Jin, Shunhua Zhou, Weining Liu

p. 1214-1224

Research article

2017-03-31

A novel tread model for tire modelling using experimental modal parameters

Zhen-feng Wang, Ming-ming Dong, Wei-peng Zhao, Liang Gu

p. 1225-1240

Research article

2017-03-31

Research on ride comfort and safety of vehicle under limited conditions based on dynamical tire model

Yongjie Lu, Wengang Zheng, Enli Chen, Junning Zhang

p. 1241-1259

Research article

2017-03-31

Ride improvement of vehicle suspensions with switchable inerter based on force cancellation strategy

Ming Foong Soong, Rahizar Ramli, Wan Nor Liza Mahadi, Ahmad Saifizul

p. 1260-1272

Research article

2017-03-31

Levitation chassis dynamic analysis and robust position control for maglev vehicles under nonlinear periodic disturbance

Haiyan Qiang, Wanli Li, Yougang Sun, Xiangyong Liu

p. 1273-1286

Research article

2017-03-31

Discrete approximate optimal vibration control for nonlinear vehicle active suspension

Shi-Yuan Han, Xiao-Fang Zhong, Yue-Hui Chen, Gong-You Tang

p. 1287-1300