Journal of Vibroengineering

Volume 18, Issue 3

May 15, 2016, Pages (1388-2015)

Acoustics, noise control and engineering applications

Research article

2016-05-15

Optimization of the low frequency noise for the dash panel based on experiment and simulation

Jing Li, Ye-fa Tan, Jian-jun Wang, Yan Wu

p. 1941-1953

Research article

2016-05-15

Research on aerodynamic noise of the high-speed transportation based on experiment and simulation

Zhi Tang, Zhi-hui Liu, Qian Wang, Zhen Li

p. 1954-1967

Research article

2016-05-15

Research on the transmission loss of the floor aluminum profile for the high-speed train based on FE-SEA hybrid method

Li-zong Lin, Zheng-yin Ding, Jian-kui Zeng, Chang-xian Zhang

p. 1968-1981

Research article

2016-05-15

A low cost flexible electro-dynamic planar loudspeaker

Jium-Ming Lin, Ubadigha Chinweze Ukachukwu, Cheng-Hung Lin

p. 1982-1990

Research article

2016-05-15

Research on noise prediction and acoustics design of shipboard cabin

Bing-Nan Liang, Hong-Liang Yu, Yan-Nian Cai

p. 1991-2003

Research article

2016-05-15

Investigation of effect of acoustic field to coagulation of particles in air flow

A. Čereška, I. Tetsman, R. Maskeliūnas, I. Grinbergienė, P. Paškevičius

p. 2004-2015

Chaos, nonlinear dynamics and applications

Research article

2016-05-15

Nonlinear free vibration analysis of nanobeams under magnetic field based on nonlocal elasticity theory

Bifurcation and chaos for electromechanical coupling torsional vibration in rolling mill system driven by DC motor

Haoran Liu, Jinjie Liu, Fei Liu, Zhanlong Zhu, Kun Wang, Shuang Liu

p. 1920-1933

Research article

2016-05-15

Theoretical and bifurcation analysis of a flexible rotor supported by gas-lubricated bearing system with porous bushing

Cheng-Chi Wang, Jui-Pin Hung

p. 1934-1940

Fault diagnosis based on vibration signal analysis

Research article

2016-05-15

Dynamic modeling of spindle-rolling bearings systems in peripheral milling operations

Taissir Hentati, Maher Barkallah, Slim Bouaziz, Mohamed Haddar

p. 1444-1458

Research article

2016-05-15

Gearbox fault diagnosis based on local mean decomposition, permutation entropy and extreme learning machine

Yu Wei, Minqiang Xu, Yongbo Li, Wenhu Huang

p. 1459-1473

Research article

2016-05-15

An improved local mean decomposition method and its application for fault diagnosis of reciprocating compressor

Gui-juan Chen, Long-qing Zou, Hai-yang Zhao, Yu-qian Li

p. 1474-1485

Research article

2016-05-15

A combined computational and experimental study on vibration stress relief for large welded DH36 steel tube

Shuqi Li, Hongyuan Fang, Xuesong Liu, Wei Wang, Qiang Wang, Wei Cui

p. 1486-1496

Research article

2016-05-15

A two-step method composed of wavelet transform and model updating method for multiple damage diagnosis in beams

Reza Abbasnia, Borhan Mirzaei, Seyedmohamadmahdi Yousefbeik

p. 1497-1513

Research article

2016-05-15

Prognostic diagnosis of the health status of an air-turbine dental handpiece rotor by using sound and vibration signals

Huang Yi-Cheng, Liu Chang-Chih, Chuo Po-Chou

p. 1514-1524

Research article

2016-05-15

Dynamic characteristics of rotor system and rub-impact fault feature research based on casing acceleration

N. F. Wang, D. X. Jiang, T. Han

p. 1525-1539

Research article

2016-05-15

Classification of machinery vibration signals based on group sparse representation

Fajun Yu, Fengxing Zhou

p. 1540-1554

Flow induced structural vibrations

Research article

2016-05-15

Research on characteristics of fluid-induced vibration for short labyrinth seals

Wanfu Zhang, Jiangang Yang, Chun Li, Ren Dai, Ailing Yang

p. 1811-1823

Research article

2016-05-15

Experimental investigation on stability of an elastically mounted circular tube under cross flow in normal triangular arrangement

Kumaraswamidhas Lakshmi Annamalai, Karthik Selva Kumar Karuppasamy

p. 1824-1838

Research article

2016-05-15

Aerodynamic characteristics of multiple flapping wing configurations

Yuan Shen, Hongming Cai

p. 1839-1848

Research article

2016-05-15

Investigation of pressure pulsations in centrifugal pump system

Vytautas Barzdaitis, Pranas Mažeika, Marius Vasylius, Valentinas Kartašovas, Artūras Tadžijevas

p. 1849-1860

Research article

2016-05-15

Preliminary airfoil design of an innovative adaptive variable camber compliant wing

Hongda Li, Haisong Ang

p. 1861-1873

Research article

2016-05-15

Multistage throttling characteristics of reverse direction impact of pilot operated check valve

Lei Liu, Jiyun Zhao

p. 1874-1883

Mechanical vibrations and applications

Research article

2016-05-15

The contact mode of a joint interface based on improved deep neural networks and its application in vibration analysis

Yang Tian, Zhifeng Liu, Ligang Cai, Guangyuan Pan

p. 1388-1405

Research article

2016-05-15

A new model for stability analysis of electromechanical nano-actuator based on Gurtin-Murdoch and consistent couple-stress theories

Maryam Keivani, Ali Koochi, Mohamadreza Abadyan

p. 1406-1416

Research article

2016-05-15

Static and dynamic characteristic analysis of high-speed press bed based on virtual simulation

Guofa Li, Jian Wang, Chuanhai Chen, Hailong Tian, Chuanyang Zhou, Fan Xu, Xiaohui Shi

p. 1417-1434

Research article

2016-05-15

Finite element modeling and experimental verification of lightweight steel floor vibration

Je-Woo Park, Tae-Hyu Ha, Hongjin Kim

p. 1435-1443

Modal analysis

Research article

2016-05-15

A study on the application of the operating modal analysis method in self-propelled gun development

Pengke Liu, Xiaojun Shao, Faming Zhou, Hongxiao Chao

p. 1683-1691

Research article

2016-05-15

Free vibration of thick annular sector plate on Pasternak foundation with general boundary conditions

Huimin Liu, Fanming Liu, Haoran Bai, Ranbing Yang

p. 1692-1706

Research article

2016-05-15

Experimental study on the influence of modal parameters of thin cylindrical shell coated with constrained layer damping

Hui Li, Jia Cheng, Wei Sun, Bangchun Wen

p. 1707-1722

Oscillations in biomedical engineering

Research article

2016-05-15

Motion analysis of a kitesurfer employing a vision-based measurement system

Anna Grzeczka, Piotr Kohut, Maciej Kłaczyński, Edmund Wittbrodt, Tadeusz Uhl

p. 1884-1892

Research article

2016-05-15

The impact of different physiotherapy techniques on trunk stabilizer muscles strength, pain and functional disability in persons diagnosed with intervertebral disc herniation

Eglė Lendraitienė, Kazimieras Poškys, Daiva Petruševičienė, Kristina Berškienė, Vilma Mauricienė

p. 1893-1904

Research article

2016-05-15

Signal intensity dynamics of malignant lymphoma in diffusion-weighted magnetic resonance imaging compared to positron emission tomography

Rytis Bliūdžius, Laima Dobrovolskienė, Algidas Basevičius, Vincentas Veikutis, Matas Juškevičius, Vaidas Oberauskas

p. 1905-1911

Seismic engineering

Research article

2016-05-15

Seismic behavior characteristic of high damping rubber bearing through shaking table test

Ju Oh, Changhwan Jang, Jin Ho Kim

p. 1591-1601

Research article

2016-05-15

Effect of soft layer on seismic response of subway station in layered stratum

Yayong Li, Xiaoguang Jin, Yuansheng Feng, Wei Luo

p. 1602-1616

Research article

2016-05-15

Simulation of spectrum-correspondent accelerogram by using artificial neural networks

Mohammad Mehdi Izadi, Majid Mohammadi

p. 1617-1630

Research article

2016-05-15

The effect of various design codes and dynamic magnification on buildings with torsional irregularity

Kwang-Ho Lee, Seong-Hoon Jeong, Seongwoo Han, Kang Su Kim

p. 1631-1638

Research article

2016-05-15

Blasting vibration on deep shaft ingate rock damage and its control measures

Weipei Xue, Zhishu Yao, Hua Cheng, Chuanxin Rong

p. 1639-1653

Research article

2016-05-15

Features based on instantaneous frequency for seismic signals clustering

Jakub Sokolowski, Jakub Obuchowski, Maciej Madziarz, Agnieszka Wylomanska, Radosław Zimroz

p. 1654-1667

Research article

2016-05-15

Parameter optimization of damper-friction isolation systems using concave friction distribution

Biao Wei, Peng Wang, Bin Yan, Lizhong Jiang, Xuhui He

p. 1668-1682

Vibration generation and control

Research article

2016-05-15

Temperature dependence of soft-doped / hard-doped PZT material properties under large signal excitation and impact on the design choice

Effect of sink flow on dual-valve electro-hydraulic excitation system

Zhen Meng, Chuan-yu Wu, Jing Ni

p. 1563-1572

Research article

2016-05-15

Research on deep hole drilling vibration suppression based on magnetorheological fluid damper

Huang Zhang, Xingquan Shen, Yaoming Li, Hongbin Miao

p. 1573-1584

Research article

2016-05-15

Analysis of horn type waveguide with impulse excitation

Darius Eidukynas, Vytautas Jurenas, Darius Mazeika

p. 1585-1590

Vibration in transportation engineering

Research article

2016-05-15

Analysis of the influence of braking control laws on gear walk

Qiaozhi Yin, Hong Nie, Ming Zhang, Yongquan Wang, Jian Deng

p. 1723-1741

Research article

2016-05-15

Reduction of train-induced vibrations by using a trench in a layered half-space

Zhenning Ba, Jingya Wang, Jianwen Liang

p. 1742-1764

Research article

2016-05-15

The ride comfort and energy-regenerative characteristics analysis of hydraulic-electricity energy regenerative suspension

Bian Gong, Xuexun Guo, Sanbao Hu, Zhigang Fang

p. 1765-1782

Research article

2016-05-15

Experiment and simulation research of the ground-borne vibration for a high-speed train

Resonance response analysis of the slab track caused by moving vehicle

Shi Jin

p. 1798-1810