Journal of Vibroengineering

Volume 18, Issue 8

December 31, 2016, Pages (4885-5631)

Acoustics, noise control and engineering applications

Research article

2016-12-31

A novel tension monitoring device of multi-rope friction hoister by using acoustic filtering sensor

Guiyun Xu, Jianpu Da, Xiaoguang Zhang, Mengfang Han, TingTing Xia

p. 5537-5552

Research article

2016-12-31

Research on numerical simulation and noise reduction of aerodynamic noise in connection section of the high-speed train

Numerical computation of aerodynamic noise of two tandem circular cylinders and flapping wing motion based on immersed boundary method

Zhi-jun Meng, Yao-ming Zhou, Dao-chun Li

p. 5572-5587

Research article

2016-12-31

Numerical computation of aerodynamic noises of the high speed train with considering pantographs

Ya-hui Wang, Jian-ting Wang, Liu-qiang Fu

p. 5588-5604

Research article

2016-12-31

Numerical study on aerodynamic noise performances of axial spacing in a contra-rotating axial fan

Hengxuan Luan, Liyuan Weng, Yuanzhong Luan, Yongchao Zhang, Peng Chen

p. 5605-5618

Research article

2016-12-31

Improved algorithm of three-dimensional beamforming based on spatial cross-array

Shaoyu Song, Zhongming Xu, Shu Li, Si Chen, Zhifei Zhang, Yansong He

p. 5619-5631

Chaos, nonlinear dynamics and applications

Research article

2016-12-31

Non-uniform embedding applications for synchronization analysis

Migle Drulyte, Kristina Lukoseviciute, Jurate Ragulskiene

p. 5481-5491

Research article

2016-12-31

Nonlinear vibration characteristic of strip mill under the coupling effect of roll-rolled piece

Bin Liu, Jiahao Jiang, Fei Liu, Haoran Liu, Peng Li

p. 5492-5504

Research article

2016-12-31

Nonlinear dynamic behavior analysis of a DC/DC converter with an ultra-high frequency Z-source converter

Shan Li, Sen Cui, Yan Chen, Yong Zheng, Wenxu Si

p. 5506-5520

Research article

2016-12-31

Analytical solution for nonlinear vertical vibration model of mill roll system based on improved complexification averaging method

Yong Zhu, Wan-lu Jiang, Xiang-dong Kong, Hao-nan Wang

p. 5521-5536

Fault diagnosis based on vibration signal analysis

Research article

2016-12-31

Multiple damage detection and localization in beam-like and complex structures using co-ordinate modal assurance criterion combined with firefly and genetic algorithms

Abdelwahhab Khatir, Mohamed Tehami, Samir Khatir, Magd Abdel Wahab

p. 5063-5073

Research article

2016-12-31

Detecting structural damage in Timoshenko beams based on optimization via simulation (OVS)

Reza Farokhzad, Benyamin Mohebi, Gholamreza Ghodrati Amiri, Mohsen Ghafory Ashtiany

p. 5074-5095

Research article

2016-12-31

Application of empirical mode decomposition and Euclidean distance technique for feature selection and fault diagnosis of planetary gearbox

Haiping Li, Jianmin Zhao, Jian Liu, Xianglong Ni

p. 5096-5113

Research article

2016-12-31

Analytical and experimental investigation on eigenfrequency-based damage diagnosis of cantilever beam

Chong Yang, Zhixu Zhang, Shaoning Nong, Changchun Zhu

p. 5114-5126

Research article

2016-12-31

Study on a novel fault diagnosis method based on information fusion method

Huimin Zhao, Wu Deng, Xinhua Yang, Xiumei Li, Zhengguang Li

p. 5127-5140

Research article

2016-12-31

Research on fault diagnosis of hydraulic pump using convolutional neural network

Jiyu Yan, Huijie Zhu, Xiaoqiang Yang, Youhui Cao, Lifu Shao

p. 5141-5152

Research article

2016-12-31

Multifractal manifold for rotating machinery fault diagnosis based on detrended fluctuation analysis

Yi Feng, Baochun Lu, Dengfeng Zhang

p. 5153-5173

Research article

2016-12-31

Pedestal looseness extent recognition method for rotating machinery based on vibration sensitive time-frequency feature and manifold learning

Renxiang Chen, Zhiyan Mu, Lixia Yang, Xiangyang Xu, Xia Zhang

p. 5174-5191

Research article

2016-12-31

Remaining life prediction of rolling bearing based on PCA and improved logistic regression model

Fengtao Wang, Bei Wang, Bosen Dun, Xutao Chen, Dawen Yan, Hong Zhu

p. 5192-5203

Research article

2016-12-31

Sparse decomposition based on ADMM dictionary learning for fault feature extraction of rolling element bearing

Qingbin Tong, Zhanlong Sun, Zhengwei Nie, Yuyi Lin, Junci Cao

p. 5204-5216

Research article

2016-12-31

Identification of internal damage in ballastless tracks based on Gaussian curvature mode shapes

Jingmang Xu, Ping Wang, Hao Liu, Zhipeng Hu, Rong Chen

p. 5217-5229

Research article

2016-12-31

The dynamic characteristics of mechanical structures destruction

Gas pipeline structural fatigue life prediction based on vibration signals analysis

Przemysław Drożyner

p. 5239-5251

Flow induced structural vibrations

Research article

2016-12-31

Design on the fairwater shape and its influence on the radiation noise of submarines

Numerical simulation of dynamic response characteristics for launch and recovery system under random irregular wave

Yongping Jin, Buyan Wan, Deshun Liu, Youduo Peng, Zhihua Cai, Jianghui Dong

p. 5390-5405

Research article

2016-12-31

On the role of surface permeability for the control of flow around a circular cylinder

Hanru Liu, Jinjia Wei

p. 5406-5415

Research article

2016-12-31

Influence of tilting rotor on characteristics of fluid-induced vibration for labyrinth seals

Wanfu Zhang, Yao Zhang, Jiangang Yang, Chun Li

p. 5416-5431

Mechanical vibrations and applications

Research article

2016-12-31

Experimental investigation of the transverse nonlinear vibration of an axially travelling belt

En-Wei Chen, Hui-Hui Lin, Neil Ferguson

p. 4885-4900

Research article

2016-12-31

Vibration and post-buckling of a functionally graded beam subjected to non-conservative forces

Qing Lu Li, Jing Hua Zhang

p. 4901-4913

Research article

2016-12-31

Implementation of swarm algorithm in modeling a flexible beam structure

Rickey Ting Pek Eek, Intan Z. Mat Darus, Shafishuhaza Sahlan, Pakharuddin Mohd Samin, Nik M. R Shaharuddin

p. 4914-4934

Research article

2016-12-31

A high-energy liquid-jet hammer with specially designed backward stroke end buffer structure

Xinxin Zhang, Jianming Peng, Kun Yin, Qilei Yin, Dongyu Wu

p. 4935-4948

Research article

2016-12-31

Design of mission adaptive landing gear for near space travel lander

Mingyang Huang, Hong Nie, Ming Zhang, Xiaohui Wei, Shuai Yue

p. 4949-4963

Research article

2016-12-31

Optimum microgeometry modifications of herringbone gear by means of fitness predicted genetic algorithm

Pengyuan Qiu, Ning Zhao, Feng Wang

p. 4964-4979

Research article

2016-12-31

Analytical model for nonlinear vibration of flexible rotor system

Min Wu, Shengbo Yang, Dongjiang Han, Daren Yu, Jinfu Yang

p. 4980-4994

Research article

2016-12-31

Study of vibrating drag reduction mechanism during horizontal drilling in slim borehole

Yu Wang, Bairu Xia, Zhiqiao Wang, Jun Zou, Baolin Liu

p. 4995-5009

Research article

2016-12-31

Dynamic creeping behaviors between hoisting rope and friction lining in friction transmission

Yongbo Guo, Dekun Zhang, Cunao Feng, Yuan Liu

p. 5010-5028

Research article

2016-12-31

Energy harvesting characteristics of PVDF layers on thin-walled structures with curved surface

Yahong Zhang, Meng Zhang, Yajun Luo, Xinong Zhang

p. 5029-5047

Research article

2016-12-31

A Unified method for vibration analysis of moderately thick annular, circular plates and their sector counterparts subjected to arbitrary boundary conditions

Fazl e Ahad, Dongyan Shi, Anees Ur Rehman, Hafiz M. Waqas

p. 5048-5062

Modal analysis and applications

Research article

2016-12-31

Free vibration analysis of truncated circular conical shells with variable thickness using the Haar wavelet method

Qiyi Dai, Qingjie Cao, Yushu Chen

p. 5291-5305

Research article

2016-12-31

Free vibration solution of thick plate by using three-dimensional coupled thermoelastic theory

Huan He, Cheng He, Weimin Chen, Guoping Chen

p. 5306-5320

Research article

2016-12-31

Elastic wave simulation based on modal excitation in 3D medium

Rimantas Barauskas, Audrius Nečiūnas, Martynas Patašius

p. 5321-5336

Oscillations in biomedical engineering

Research article

2016-12-31

Optimization of the control scheme for human extremity exoskeleton

Yang Li, Cheng Xu, Xiaorong Guan, Zhong Li

p. 5432-5439

Research article

2016-12-31

Performance study of the aortic valves with abnormally thickened leaflets during systole

Cheung-Hwa Hsu, Chao-Hui Ou, Ha-Hai Vu

p. 5440-5451

Research article

2016-12-31

Design of a bionic-inspired exoskeleton robot for lower limb assist

Yun-Ping Sun, Shuo-Ching Chen, Yen-Chu Liang, Lung-Nan Wu

p. 5452-5461

Research article

2016-12-31

Biomechanical assessment of brain dynamic responses due to blast-induced wave propagation

Bin Yang, Qun Wang, Peng Li, Yong Tang, Yu Wang, Zheng Shi, Li-Bo Cao

p. 5462-5472

Research article

2016-12-31

An objective evaluation of healthy human upper extremity motions

Artūras Linkel, Julius Griškevičius, Kristina Daunoravičienė

p. 5473-5480

Seismic engineering and applications

Research article

2016-12-31

An equivalent linear model for shear pin fractures and its experimental verification

Tianbo Peng, Ning Guo

p. 5281-5290

Vibration generation and control

Research article

2016-12-31

Backstepping integral control for hydraulic servo system based on LuGre friction model

Hongyu Tang, Pan Tian

p. 5252-5265

Research article

2016-12-31

A novel servo control method based on feedforward control – Fuzzy-grey predictive controller for stabilized and tracking platform system

Meng Wang, He Zhang, Xiaofeng Wang, Yunfeng He, Jianshan Lu

p. 5266-5280

Vibration in transportation engineering

Research article

2016-12-31

Research on vibration characteristics and its key influencing factors of new mechanical elastic wheel

Qiang Wang, Youqun Zhao, Fen Lin, Hongxun Fu, Xianbin Du

p. 5337-5352

Research article

2016-12-31

Analysis of bending and angular vibration of the crankshaft with a torsional vibrations damper

Bogumil Chiliński, Maciej Zawisza

p. 5353-5363

Research article

2016-12-31

Time variant natural frequencies of a roadway bridge under stochastic vehicle flow

Mao Ye, Xiangxiang Chen, Min Ren, Baoxing Cao, Shifan Huang

p. 5364-5377